get_current

**调用者**
名称	描述
dump_stack_print_info	dump_stack_print_info - print generic debug info for dump_stack()@log_lvl: log level Arch-specific dump_stack() implementations can use this function to* print out the same debug information as the generic dump_stack().
irqsafe1_hard_spin_12
irqsafe1_hard_spin_21
irqsafe1_hard_rlock_12
irqsafe1_hard_rlock_21
irqsafe1_hard_wlock_12
irqsafe1_hard_wlock_21
irqsafe1_soft_spin_12
irqsafe1_soft_spin_21
irqsafe1_soft_rlock_12
irqsafe1_soft_rlock_21
irqsafe1_soft_wlock_12
irqsafe1_soft_wlock_21
irqsafe2B_hard_spin_12
irqsafe2B_hard_spin_21
irqsafe2B_hard_rlock_12
irqsafe2B_hard_rlock_21
irqsafe2B_hard_wlock_12
irqsafe2B_hard_wlock_21
irqsafe2B_soft_spin_12
irqsafe2B_soft_spin_21
irqsafe2B_soft_rlock_12
irqsafe2B_soft_rlock_21
irqsafe2B_soft_wlock_12
irqsafe2B_soft_wlock_21
irqsafe3_hard_spin_123
irqsafe3_hard_spin_132
irqsafe3_hard_spin_213
irqsafe3_hard_spin_231
irqsafe3_hard_spin_312
irqsafe3_hard_spin_321
irqsafe3_hard_rlock_123
irqsafe3_hard_rlock_132
irqsafe3_hard_rlock_213
irqsafe3_hard_rlock_231
irqsafe3_hard_rlock_312
irqsafe3_hard_rlock_321
irqsafe3_hard_wlock_123
irqsafe3_hard_wlock_132
irqsafe3_hard_wlock_213
irqsafe3_hard_wlock_231
irqsafe3_hard_wlock_312
irqsafe3_hard_wlock_321
irqsafe3_soft_spin_123
irqsafe3_soft_spin_132
irqsafe3_soft_spin_213
irqsafe3_soft_spin_231
irqsafe3_soft_spin_312
irqsafe3_soft_spin_321
irqsafe3_soft_rlock_123
irqsafe3_soft_rlock_132
irqsafe3_soft_rlock_213
irqsafe3_soft_rlock_231
irqsafe3_soft_rlock_312
irqsafe3_soft_rlock_321
irqsafe3_soft_wlock_123
irqsafe3_soft_wlock_132
irqsafe3_soft_wlock_213
irqsafe3_soft_wlock_231
irqsafe3_soft_wlock_312
irqsafe3_soft_wlock_321
irqsafe4_hard_spin_123
irqsafe4_hard_spin_132
irqsafe4_hard_spin_213
irqsafe4_hard_spin_231
irqsafe4_hard_spin_312
irqsafe4_hard_spin_321
irqsafe4_hard_rlock_123
irqsafe4_hard_rlock_132
irqsafe4_hard_rlock_213
irqsafe4_hard_rlock_231
irqsafe4_hard_rlock_312
irqsafe4_hard_rlock_321
irqsafe4_hard_wlock_123
irqsafe4_hard_wlock_132
irqsafe4_hard_wlock_213
irqsafe4_hard_wlock_231
irqsafe4_hard_wlock_312
irqsafe4_hard_wlock_321
irqsafe4_soft_spin_123
irqsafe4_soft_spin_132
irqsafe4_soft_spin_213
irqsafe4_soft_spin_231
irqsafe4_soft_spin_312
irqsafe4_soft_spin_321
irqsafe4_soft_rlock_123
irqsafe4_soft_rlock_132
irqsafe4_soft_rlock_213
irqsafe4_soft_rlock_231
irqsafe4_soft_rlock_312
irqsafe4_soft_rlock_321
irqsafe4_soft_wlock_123
irqsafe4_soft_wlock_132
irqsafe4_soft_wlock_213
irqsafe4_soft_wlock_231
irqsafe4_soft_wlock_312
irqsafe4_soft_wlock_321
irq_inversion_hard_spin_123
irq_inversion_hard_spin_132
irq_inversion_hard_spin_213
irq_inversion_hard_spin_231
irq_inversion_hard_spin_312
irq_inversion_hard_spin_321
irq_inversion_hard_rlock_123
irq_inversion_hard_rlock_132
irq_inversion_hard_rlock_213
irq_inversion_hard_rlock_231
irq_inversion_hard_rlock_312
irq_inversion_hard_rlock_321
irq_inversion_hard_wlock_123
irq_inversion_hard_wlock_132
irq_inversion_hard_wlock_213
irq_inversion_hard_wlock_231
irq_inversion_hard_wlock_312
irq_inversion_hard_wlock_321
irq_inversion_soft_spin_123
irq_inversion_soft_spin_132
irq_inversion_soft_spin_213
irq_inversion_soft_spin_231
irq_inversion_soft_spin_312
irq_inversion_soft_spin_321
irq_inversion_soft_rlock_123
irq_inversion_soft_rlock_132
irq_inversion_soft_rlock_213
irq_inversion_soft_rlock_231
irq_inversion_soft_rlock_312
irq_inversion_soft_rlock_321
irq_inversion_soft_wlock_123
irq_inversion_soft_wlock_132
irq_inversion_soft_wlock_213
irq_inversion_soft_wlock_231
irq_inversion_soft_wlock_312
irq_inversion_soft_wlock_321
irq_read_recursion_hard_123
irq_read_recursion_hard_132
irq_read_recursion_hard_213
irq_read_recursion_hard_231
irq_read_recursion_hard_312
irq_read_recursion_hard_321
irq_read_recursion_soft_123
irq_read_recursion_soft_132
irq_read_recursion_soft_213
irq_read_recursion_soft_231
irq_read_recursion_soft_312
irq_read_recursion_soft_321
check_preemption_disabled
should_fail	This code is stolen from failmalloc-1.0* http://www.nongnu.org/failmalloc/
validate_nla
__nla_validate_parse
suppress_report
ubsan_prologue
ubsan_epilogue
restore_sigcontext
setup_sigcontext
get_sigframe
__setup_frame
__setup_rt_frame
handle_signal	自定义信号处理函数
__die
read_ldt
write_ldt
get_align_mask	Align a virtual address to avoid aliasing in the I$ on AMD F15h.
find_start_end	SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,unsigned long, prot, unsigned long, flags,unsigned long, fd, unsigned long, off)long error;error = -EINVAL;if (off & ~PAGE_MASK)goto out;error = ksys_mmap_pgoff(addr, len, prot, flags, fd, off
arch_get_unmapped_area
arch_get_unmapped_area_topdown
aout_dump_debugregs	Dump the debug register contents to the user.* We can't dump our per cpu values because it* may contain cpu wide breakpoint, something that* doesn't belong to the current task.* TODO: include non-ptrace user breakpoints (perf)
hw_breakpoint_restore
hw_breakpoint_handler	Handle debug exception notifications.* Return value is either NOTIFY_STOP or NOTIFY_DONE as explained below.* NOTIFY_DONE returned if one of the following conditions is true.* i) When the causative address is from user-space and the exception
copy_thread_tls
arch_setup_new_exec	Called immediately after a successful exec.
arch_align_stack
kernel_fpu_begin
fpu__save	Save the FPU state (mark it for reload if necessary):* This only ever gets called for the current task.
fpu__copy
fpu__initialize	Activate the current task's in-memory FPU context,* if it has not been used before:
fpu__prepare_read	This function must be called before we read a task's fpstate
fpu__prepare_write	This function must be called before we write a task's fpstate.* Invalidate any cached FPU registers.* After this function call, after registers in the fpstate are* modified and the child task has woken up, the child task will
fpu__drop	Drops current FPU state: deactivates the fpregs and* the fpstate. NOTE: it still leaves previous contents* in the fpregs in the eager-FPU case.* This function can be used in cases where we know that* a state-restore is coming: either an explicit one,
fpu__clear	Clear the FPU state back to init state.* Called by sys_execve(), by the signal handler code and by various* error paths.
fpregs_mark_activate
get_xsave_field_ptr	This wraps up the common operations that need to occur when retrieving* data from xsave state. It first ensures that the current task was* using the FPU and retrieves the data in to a buffer. It then calculates
ptrace_triggered
get_free_idx	sys_alloc_thread_area: get a yet unused TLS descriptor index.
set_tls_desc
move_myself
pseudo_lock_dev_mmap
save_v86_state
do_sys_vm86
set_vflags_long	It is correct to call set_IF(regs) from the set_vflags_** functions. However someone forgot to call clear_IF(regs)* in the opposite case.* After the command sequence CLI PUSHF STI POPF you should* end up with interrupts disabled, but you ended up with
set_vflags_short
get_vflags
do_int	There are so many possible reasons for this function to return* VM86_INTx, so adding another doesn't bother me. We can expect* userspace programs to be able to handle it. (Getting a problem* in userspace is always better than an Oops anyway.) [KD]
handle_vm86_trap
handle_vm86_fault
riprel_pre_xol	If we're emulating a rip-relative instruction, save the contents* of the scratch register and store the target address in that register.
riprel_post_xol
default_post_xol_op	We have to fix things up as follows:* Typically, the new ip is relative to the copied instruction
arch_uprobe_pre_xol	arch_uprobe_pre_xol - prepare to execute out of line.@auprobe: the probepoint information.@regs: reflects the saved user state of current task.
arch_uprobe_post_xol	Called after single-stepping. To avoid the SMP problems that can* occur when we temporarily put back the original opcode to* single-step, we single-stepped a copy of the instruction.* This function prepares to resume execution after the single-step.
arch_uprobe_abort_xol	This function gets called when XOL instruction either gets trapped or* the thread has a fatal signal. Reset the instruction pointer to its* probed address for the potential restart or for post mortem analysis.
arch_uretprobe_hijack_return_addr
__mmdrop	Called when the last reference to the mm* is dropped: either by a lazy thread or by* mmput. Free the page directory and the mm.
mm_init	设置内核内存分配器
mm_access
copy_mm	复制内存
copy_fs	复制文件系统
copy_files	复制打开文件信息
copy_io	复制I/O
copy_sighand	复制信号句柄
copy_signal	复制信号
SYSCALL_DEFINE1
copy_process	创建进程
check_unshare_flags	Check constraints on flags passed to the unshare system call.
unshare_fs	Unshare the filesystem structure if it is being shared
unshare_fd	Unshare file descriptor table if it is being shared
ksys_unshare	share allows a process to 'unshare' part of the process* context which was originally shared using clone. copy_** functions used by do_fork() cannot be used here directly* because they modify an inactive task_struct that is being* constructed
SYSCALL_DEFINE1
__warn
exit_mm	Turn us into a lazy TLB process if we* aren't already..
do_exit
do_group_exit	Take down every thread in the group. This is called by fatal signals* as well as by sys_exit_group (below).
wait_task_zombie	Handle sys_wait4 work for one task in state EXIT_ZOMBIE. We hold* read_lock(&tasklist_lock) on entry. If we return zero, we still hold* the lock and this task is uninteresting. If we return nonzero, we have
do_wait
__do_softirq
warn_sysctl_write
deprecated_sysctl_warning
ptrace_traceme	ptrace_traceme -- helper for PTRACE_TRACEME* Performs checks and sets PT_PTRACED.* Should be used by all ptrace implementations for PTRACE_TRACEME.
ptrace_setoptions
calculate_sigpending
print_dropped_signal
task_join_group_stop
dequeue_signal	Dequeue a signal and return the element to the caller, which is* expected to free it.* All callers have to hold the siglock.
sigqueue_free
may_ptrace_stop
ptrace_stop	This must be called with current->sighand->siglock held.* This should be the path for all ptrace stops.* We always set current->last_siginfo while stopped here.* That makes it a way to test a stopped process for
ptrace_notify
do_signal_stop	do_signal_stop - handle group stop for SIGSTOP and other stop signals@signr: signr causing group stop if initiating If %JOBCTL_STOP_PENDING is not set yet, initiate group stop with @signr* and participate in it
do_jobctl_trap	do_jobctl_trap - take care of ptrace jobctl traps* When PT_SEIZED, it's used for both group stop and explicit* SEIZE/INTERRUPT traps. Both generate PTRACE_EVENT_STOP trap with* accompanying siginfo. If stopped, lower eight bits of exit_code contain
do_freezer_trap	do_freezer_trap - handle the freezer jobctl trap* Puts the task into frozen state, if only the task is not about to quit.* In this case it drops JOBCTL_TRAP_FREEZE.* CONTEXT:* Must be called with @current->sighand->siglock held,
ptrace_signal
get_signal
signal_delivered	signal_delivered - @ksig: kernel signal struct@stepping: nonzero if debugger single-step or block-step in use* This function should be called when a signal has successfully been* delivered
sys_restart_syscall
__set_task_blocked
set_user_sigmask	The api helps set app-provided sigmasks
set_compat_user_sigmask
SYSCALL_DEFINE4	sys_rt_sigprocmask - change the list of currently blocked signals@how: whether to add, remove, or set signals@nset: stores pending signals@oset: previous value of signal mask if non-null@sigsetsize: size of sigset_t type
COMPAT_SYSCALL_DEFINE4
do_sigpending
kernel_sigaction	内核信号处理
do_sigaltstack
SYSCALL_DEFINE3	sys_sigprocmask - examine and change blocked signals@how: whether to add, remove, or set signals@nset: signals to add or remove (if non-null)@oset: previous value of signal mask if non-null Some platforms have their own version with special arguments;
sigsuspend
sys_getppid
do_sys_times
SYSCALL_DEFINE2	This needs some heavy checking
set_special_pids
ksys_setsid
override_release	Work around broken programs that cannot handle "Linux 3.0".* Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40* And we map 4.x and later versions to 2.6.60+x, so 4.0/5.0/6.0/... would be* 2.6.60.
SYSCALL_DEFINE2
SYSCALL_DEFINE2	Only setdomainname; getdomainname can be implemented by calling* uname()
SYSCALL_DEFINE2	Back compatibility for getrlimit. Needed for some apps.
COMPAT_SYSCALL_DEFINE2
SYSCALL_DEFINE1
prctl_set_mm
SYSCALL_DEFINE5
call_usermodehelper_exec_async	This is the task which runs the usermode application
process_one_work	process_one_work - process single work@worker: self@work: work to process* Process @work
set_pf_worker
check_flush_dependency	heck_flush_dependency - check for flush dependency sanity@target_wq: workqueue being flushed@target_work: work item being flushed (NULL for workqueue flushes)* %current is trying to flush the whole @target_wq or @target_work on it
set_kthread_struct
kthread
create_kthread
kthreadd
kthread_associate_blkcg	kthread_associate_blkcg - associate blkcg to current kthread@css: the cgroup info Current thread must be a kthread. The thread is running jobs on behalf of* other threads. In some cases, we expect the jobs attach cgroup info of
kthread_blkcg	kthread_blkcg - get associated blkcg css of current kthread* Current thread must be a kthread.
unshare_nsproxy_namespaces	Called from unshare. Unshare all the namespaces part of nsproxy.* On success, returns the new nsproxy.
__put_cred	__put_cred - Destroy a set of credentials@cred: The record to release Destroy a set of credentials on which no references remain.
override_creds	verride_creds - Override the current process's subjective credentials@new: The credentials to be assigned Install a set of temporary override subjective credentials on the current* process, returning the old set for later reversion.
revert_creds	vert_creds - Revert a temporary subjective credentials override@old: The credentials to be restored Revert a temporary set of override subjective credentials to an old set,* discarding the override set.
migrate_to_reboot_cpu
async_schedule_node_domain	async_schedule_node_domain - NUMA specific version of async_schedule_domain@func: function to execute asynchronously@data: data pointer to pass to the function@node: NUMA node that we want to schedule this on or close to@domain: the domain
sched_fork	调度进程
finish_task_switch	sh_task_switch - clean up after a task-switch*@prev: the thread we just switched away from
schedule_tail	schedule_tail - first thing a freshly forked thread must call.*@prev: the thread we just switched away from.
do_task_dead
schedule_idle	synchronize_rcu_tasks() makes sure that no task is stuck in preempted* state (have scheduled out non-voluntarily) by making sure that all* tasks have either left the run queue or have gone into user space
do_sched_yield	sys_sched_yield - yield the current processor to other threads.* This function yields the current CPU to other tasks. If there are no* other threads running on this CPU then this function will return.* Return: 0.
io_schedule_prepare
io_schedule_finish
play_idle_precise
is_kthread_should_stop
ipi_sync_rq_state
membarrier_private_expedited
psi_memstall_enter	psi_memstall_enter - mark the beginning of a memory stall section@flags: flags to handle nested sections Marks the calling task as being stalled due to a lack of memory,* such as waiting for a refault or performing reclaim.
psi_memstall_leave	psi_memstall_leave - mark the end of an memory stall section@flags: flags to handle nested memdelay sections Marks the calling task as no longer stalled due to lack of memory.
graph_lock
graph_unlock
lockdep_off
lockdep_on
lockdep_init_map	Initialize a lock instance's lock-class mapping info:
lock_set_class
lock_downgrade
lock_acquire	We are not always called with irqs disabled - do that here,* and also avoid lockdep recursion:
lock_release
lock_is_held_type
lock_pin_lock
lock_repin_lock
lock_unpin_lock
lockdep_reset
free_zapped_rcu
lockdep_free_key_range_reg	Used in module
print_held_locks_bug
debug_check_no_locks_held
mark_wakeup_next_waiter	Remove the top waiter from the current tasks pi waiter tree and* queue it up.* Called with lock->wait_lock held and interrupts disabled.
remove_waiter	Remove a waiter from a lock and give up* Must be called with lock->wait_lock held and interrupts disabled. I must* have just failed to try_to_take_rt_mutex().
debug_rt_mutex_print_deadlock
spin_dump
rwlock_bug
freeze_processes	ze_processes - Signal user space processes to enter the refrigerator.* The current thread will not be frozen. The same process that calls* freeze_processes must later call thaw_processes.* On success, returns 0
check_syslog_permissions
devkmsg_write
irq_thread_dtor
debug_lockdep_rcu_enabled
synchronize_rcu_trivial	Definitions for trivial CONFIG_PREEMPT=n-only torture testing.* This implementation does not necessarily work well with CPU hotplug.
klp_ftrace_handler
klp_copy_process	Called from copy_process() during fork
check_for_stack
__refrigerator	Refrigerator is place where frozen processes are stored :-).
set_freezable	set_freezable - make %current freezable* Mark %current freezable and enter refrigerator if necessary.
schedule_timeout	schedule_timeout - sleep until timeout@timeout: timeout value in jiffies Make the current task sleep until @timeout jiffies have* elapsed
do_nanosleep
hrtimer_nanosleep
posix_timer_by_id
posix_timer_add
do_timer_create	Create a POSIX.1b interval timer.
__lock_timer	CLOCKs: The POSIX standard calls for a couple of clocks and allows us* to implement others
SYSCALL_DEFINE1	Delete a POSIX.1b interval timer.
SYSCALL_DEFINE4
lookup_task	Functions for validating access to tasks.
check_rlimit
do_cpu_nanosleep
posix_cpu_nsleep
SYSCALL_DEFINE3
COMPAT_SYSCALL_DEFINE3
sys_ni_posix_timers
SYSCALL_DEFINE4
get_futex_key	get_futex_key() - Get parameters which are the keys for a futex@uaddr: virtual address of the futex@fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED*@key: address where result is stored
fault_in_user_writeable	ault_in_user_writeable() - Fault in user address and verify RW access@uaddr: pointer to faulting user space address Slow path to fixup the fault we just took in the atomic write* access to @uaddr
refill_pi_state_cache	PI code:
alloc_pi_state
put_pi_state	Drops a reference to the pi_state object and frees or caches it* when the last reference is gone.
futex_atomic_op_inuser
__queue_me
futex_wait
futex_wait_requeue_pi	ex_wait_requeue_pi() - Wait on uaddr and take uaddr2@uaddr: the futex we initially wait on (non-pi)@flags: futex flags (FLAGS_SHARED, FLAGS_CLOCKRT, etc
SYSCALL_DEFINE2	sys_set_robust_list() - Set the robust-futex list head of a task@head: pointer to the list-head@len: length of the list-head, as userspace expects
COMPAT_SYSCALL_DEFINE2
do_init_module	This is where the real work happens.* Keep it uninlined to provide a reliable breakpoint target, e.g. for the gdb* helper command 'lx-symbols'.
fill_ac	Write an accounting entry for an exiting process* The acct_process() call is the workhorse of the process* accounting system. The struct acct is built here and then written* into the accounting file. This function should only be called from
do_acct_process
acct_collect	acct_collect - collect accounting information into pacct_struct@exitcode: task exit code@group_dead: not 0, if this thread is the last one in the process.
crash_save_cpu
COMPAT_SYSCALL_DEFINE3
current_cgns_cgroup_from_root	look up cgroup associated with current task's cgroup namespace on the* specified hierarchy
apply_cgroup_root_flags
cgroup_init_fs_context	Initialise the cgroup filesystem creation/reconfiguration context. Notably,* we select the namespace we're going to use.
cgroup_file_write
cgroup_procs_write_permission
css_create
proc_cgroup_show	proc_cgroup_show()* - Print task's cgroup paths into seq_file, one line for each hierarchy* - Used for /proc//cgroup.
cgroup1_reconfigure
cgroup_enter_frozen	Enter frozen/stopped state, if not yet there. Update cgroup's counters,* and revisit the state of the cgroup, if necessary.
cgroup_leave_frozen	Conditionally leave frozen/stopped state
cpuset_fork	Make sure the new task conform to the current state of its parent,* which could have been changed by cpuset just after it inherits the* state from the parent and before it sits on the cgroup's task list.
cpuset_init_current_mems_allowed
cpuset_nodemask_valid_mems_allowed	puset_nodemask_valid_mems_allowed - check nodemask vs. curremt mems_allowed@nodemask: the nodemask to be checked Are any of the nodes in the nodemask allowed in current->mems_allowed?
__cpuset_node_allowed	puset_node_allowed - Can we allocate on a memory node?@node: is this an allowed node?@gfp_mask: memory allocation flags* If we're in interrupt, yes, we can always allocate. If @node is set in* current's mems_allowed, yes
cpuset_spread_node	puset_mem_spread_node() - On which node to begin search for a file page* cpuset_slab_spread_node() - On which node to begin search for a slab page* If a task is marked PF_SPREAD_PAGE or PF_SPREAD_SLAB (as for* tasks in a cpuset with is_spread_page or
cpuset_mem_spread_node
cpuset_slab_spread_node
cpuset_print_current_mems_allowed	puset_print_current_mems_allowed - prints current's cpuset and mems_allowed* Description: Prints current's name, cpuset name, and cached copy of its* mems_allowed to the kernel log.
userns_install
zap_pid_ns_processes
audit_receive_msg
audit_get_tty
audit_log_task_info
audit_set_loginuid	audit_set_loginuid - set current task's loginuid@loginuid: loginuid value Returns 0.* Called (set) from fs/proc/base.c::proc_loginuid_write().
audit_log_execve_info
audit_log_exit
__audit_getname	__audit_getname - add a name to the list@name: name to add Add a name to the list of audit names for this context.* Called from fs/namei.c:getname().
audit_log_task
kcov_task_init
kcov_ioctl_locked
kcov_common_handle	See the comment before kcov_remote_start() for usage details.
kgdb_flush_swbreak_addr	Some architectures need cache flushes when we set/clear a* breakpoint:
gdb_cmd_query	Handle the 'q' query packets
gdb_serial_stub	This function performs all gdbserial command procesing
seccomp_may_assign_mode
secure_computing_strict
prctl_get_seccomp
seccomp_set_mode_strict	seccomp_set_mode_strict: internal function for setting strict seccomp* Once current->seccomp.mode is non-zero, it may not be changed.* Returns 0 on success or -EINVAL on failure.
get_uts
__delayacct_blkio_start
__delayacct_freepages_start
__delayacct_freepages_end
__delayacct_thrashing_start
__delayacct_thrashing_end
__rb_allocate_pages
probe_wakeup
move_to_next_cpu
ftrace_push_return_trace	Add a function return address to the trace stack on thread info.
function_graph_enter
ftrace_pop_return_trace	Retrieve a function return address to the trace stack on thread info.
ftrace_return_to_handler	the original return address.
filter_pred_comm	Filter predicate for COMM.
____bpf_probe_write_user
bpf_get_probe_write_proto
____bpf_send_signal
process_fetch_insn	Note that we don't verify it, since the code does not come from user space
fetch_store_string	Fetch a null-terminated string. Caller MUST set (u32 )dest with max* length and relative data location.
fetch_store_strlen	Return the length of string -- including null terminal byte
translate_user_vaddr
uprobe_dispatcher
uretprobe_dispatcher
dev_map_update_elem
dev_map_hash_update_elem
bpf_prog_offload_init
bpf_map_offload_map_alloc
stack_map_get_build_id_offset
perf_event_enable_on_exec	Enable all of a task's events that have been marked enable-on-exec.* This expects task == current.
perf_event_task_enable
perf_event_task_disable
perf_sample_regs_user
perf_virt_to_phys
perf_iterate_sb	Iterate all events that need to receive side-band events.* For new callers; ensure that account_pmu_sb_event() includes* your event, otherwise it might not get delivered.
perf_event_exec
perf_addr_filters_adjust	Adjust all task's events' filters to the new vma
get_perf_callchain
__create_xol_area
get_xol_area	get_xol_area - Allocate process's xol_area if necessary.* This area will be used for storing instructions for execution out of line.* Returns the allocated area or NULL.
uprobe_get_trap_addr
get_utask	Allocate a uprobe_task object for the task if if necessary.* Called when the thread hits a breakpoint.* Returns:* - pointer to new uprobe_task on success* - NULL otherwise
uprobe_warn
dup_xol_work
uprobe_copy_process	复制上下文
get_trampoline_vaddr	Current area->vaddr notion assume the trampoline address is always* equal area->vaddr.* Returns -1 in case the xol_area is not allocated.
prepare_uretprobe
find_active_uprobe
handler_chain
handle_trampoline
handle_singlestep	Perform required fix-ups and disable singlestep.* Allow pending signals to take effect.
uprobe_notify_resume	On breakpoint hit, breakpoint notifier sets the TIF_UPROBE flag and* allows the thread to return from interrupt. After that handle_swbp()* sets utask->active_uprobe.* On singlestep exception, singlestep notifier sets the TIF_UPROBE flag
uprobe_pre_sstep_notifier	probe_pre_sstep_notifier gets called from interrupt context as part of* notifier mechanism. Set TIF_UPROBE flag and indicate breakpoint hit.
uprobe_post_sstep_notifier	probe_post_sstep_notifier gets called in interrupt context as part of notifier* mechanism. Set TIF_UPROBE flag and indicate completion of singlestep.
__context_tracking_enter	ext_tracking_enter - Inform the context tracking that the CPU is going* enter user or guest space mode
rseq_get_rseq_cs
stackleak_erase
stackleak_track_stack
do_mount_root
handle_initrd
unaccount_page_cache_page
__add_to_page_cache_locked
dio_warn_stale_pagecache	Warn about a page cache invalidation failure during a direct I/O write.
__generic_file_write_iter	__generic_file_write_iter - write data to a file@iocb: IO state structure (file, offset, etc.)@from: iov_iter with data to write* This function does all the work needed for actually writing data to a* file
dump_header
out_of_memory	_of_memory - kill the "best" process when we run out of memory@oc: pointer to struct oom_control If we run out of memory, we have the choice between either* killing a random task (bad), letting the system crash (worse)
balance_dirty_pages	alance_dirty_pages() must be called by processes which are generating dirty* data
balance_dirty_pages_ratelimited	alance_dirty_pages_ratelimited - balance dirty memory state@mapping: address_space which was dirtied Processes which are dirtying memory should call in here once for each page* which was newly dirtied. The function will periodically check the system's
account_page_dirtied	Helper function for set_page_dirty family.* Caller must hold lock_page_memcg().* NOTE: This relies on being atomic wrt interrupts.
account_page_redirty	Call this whenever redirtying a page, to de-account the dirty counters* (NR_DIRTIED, WB_DIRTIED, tsk->nr_dirtied), so that they match the written* counters (NR_WRITTEN, WB_WRITTEN) in long term
may_write_to_inode
current_may_throttle	If a kernel thread (such as nfsd for loop-back mounts) services* a backing device by writing to the page cache it sets PF_LESS_THROTTLE.* In that case we should only throttle if the backing device it is* writing to is congested
shrink_node
throttle_direct_reclaim	Throttle direct reclaimers if backing storage is backed by the network* and the PFMEMALLOC reserve for the preferred node is getting dangerously* depleted. kswapd will continue to make progress and wake the processes* when the low watermark is reached.
mem_cgroup_shrink_node	Only used by soft limit reclaim. Do not reuse for anything else.
__node_reclaim	Try to free up some pages from this node through reclaim.
node_reclaim
shmem_get_unmapped_area
randomize_stack_top
vm_mmap_pgoff
vmacache_valid_mm	This task may be accessing a foreign mm via (for example)* get_user_pages()->find_vma(). The vmacache is task-local and this* task's vmacache pertains to a different mm (ie, its own). There is* nothing we can do here.
vmacache_update
vmacache_find
__mm_populate	__mm_populate - populate and/or mlock pages within a range of address space.* This is used to implement mlock() and the MAP_POPULATE / MAP_LOCKED mmap* flags. VMAs must be already marked with the desired vm_flags, and* mmap_sem must not be held.
get_user_pages	This is the same as get_user_pages_remote(), just with a* less-flexible calling convention where we assume that the task* and mm being operated on are the current task's and don't allow* passing of a locked parameter. We also obviously don't pass
get_user_pages_locked	We can leverage the VM_FAULT_RETRY functionality in the page fault* paths better by using either get_user_pages_locked() or* get_user_pages_unlocked().* get_user_pages_locked() is suitable to replace the form:* down_read(&mm->mmap_sem);* do_something()
get_user_pages_unlocked	get_user_pages_unlocked() is suitable to replace the form:* down_read(&mm->mmap_sem);* get_user_pages(tsk, mm,
__gup_longterm_unlocked
kobjsize	Return the total memory allocated for this pointer, not* just what the caller asked for.* Doesn't have to be accurate, i.e. may have races.
__vmalloc_user_flags
SYSCALL_DEFINE1	sys_brk() for the most part doesn't need the global kernel* lock, except when an application is doing something nasty* like trying to un-brk an area that has already been mapped* to a regular file. in this case, the unmapping will need
validate_mmap_request	determine whether a mapping should be permitted and, if so, what sort of* mapping we're capable of supporting
determine_vm_flags	we've determined that we can make the mapping, now translate what we* now know into VMA flags
do_mmap_private	set up a private mapping or an anonymous shared mapping
do_mmap	handle mapping creation for uClinux
do_munmap	lease a mapping* - under NOMMU conditions the chunk to be unmapped must be backed by a single* VMA, though it need not cover the whole VMA
vm_munmap
do_mremap	xpand (or shrink) an existing mapping, potentially moving it at the same* time (controlled by the MREMAP_MAYMOVE flag and available VM space)* under NOMMU conditions, we only permit changing a mapping's size, and only* as long as it stays within the
SYSCALL_DEFINE5
sync_mm_rss
add_mm_rss_vec
print_bad_pte	This function is called to print an error when a bad pte* is found. For example, we might have a PFN-mapped pte in* a region that doesn't allow it.* The calling function must still handle the error.
print_vma_addr	Print the name of a VMA.
do_mincore	Do a chunk of "sys_mincore()". We've already checked* all the arguments, we hold the mmap semaphore: we should* just return the amount of info we're asked for.
SYSCALL_DEFINE3	The mincore(2) system call
mlock_fixup	mlock_fixup - handle mlock[all]/munlock[all] requests.* Filters out "special" vmas -- VM_LOCKED never gets set for these, and* munlock is a no-op. However, for some special vmas, we go ahead and* populate the ptes.
apply_vma_lock_flags
count_mm_mlocked_page_nr	Go through vma areas and sum size of mlocked* vma pages, as return value.* Note deferred memory locking case(mlock2(,,MLOCK_ONFAULT)* is also counted.* Return value: previously mlocked page counts
do_mlock
SYSCALL_DEFINE2
apply_mlockall_flags	Take the MCL_* flags passed into mlockall (or 0 if called from munlockall)* and translate into the appropriate modifications to mm->def_flags and/or the* flags for all current VMAs.* There are a couple of subtleties with this
SYSCALL_DEFINE1
sys_munlockall
SYSCALL_DEFINE1
do_mmap	The caller must hold down_write(¤t->mm->mmap_sem).
mmap_region
unmapped_area
unmapped_area_topdown
arch_get_unmapped_area	Get an address range which is currently unmapped.* For shmat() with addr=0.* Ugly calling convention alert:* Return value with the low bits set means error value,* ie* if (ret & ~PAGE_MASK)* error = ret;
arch_get_unmapped_area_topdown	This mmap-allocator allocates new areas top-down from below the* stack's low limit (the base):
get_unmapped_area
__vm_munmap
SYSCALL_DEFINE5	Emulation of deprecated remap_file_pages() syscall.
do_brk_flags	his is really a simplified "do_mmap". it only handles* anonymous maps. eventually we may be able to do some* brk-specific accounting here.
vm_brk_flags
may_expand_vm	Return true if the calling process may expand its vm space by the passed* number of pages
special_mapping_mremap
mprotect_fixup
do_mprotect_pkey	pkey==-1 when doing a legacy mprotect()
vma_to_resize
mremap_to
SYSCALL_DEFINE5	Expand (or shrink) an existing mapping, potentially moving it at the* same time (controlled by the MREMAP_MAYMOVE flag and available VM space)* MREMAP_FIXED option added 5-Dec-1999 by Benjamin LaHaise* This option implies MREMAP_MAYMOVE.
SYSCALL_DEFINE3	MS_SYNC syncs the entire file - including mappings
bad_page
warn_alloc_show_mem
warn_alloc
__alloc_pages_may_oom
__gfp_pfmemalloc_flags	Distinguish requests which really need access to full memory* reserves from oom victims which can live with a portion of it
should_reclaim_retry	Checks whether it makes sense to retry the reclaim to make a forward progress* for the given allocation request.* We give up when we either have tried MAX_RECLAIM_RETRIES in a row* without success, or when we couldn't even meet the watermark if we
__alloc_pages_slowpath
madvise_willneed	Schedule all required I/O operations. Do not wait for completion.
madvise_free_pte_range
madvise_dontneed_free
madvise_remove	Application wants to free up the pages and associated backing store.* This is effectively punching a hole into the middle of a file.
SYSCALL_DEFINE3	The madvise(2) system call
SYSCALL_DEFINE1
mem_cgroup_throttle_swaprate
__frontswap_unuse_pages
hugetlb_no_page
do_set_mempolicy	Set the process memory policy
do_get_mempolicy	Retrieve NUMA policy
new_page	Allocate a new page for page migration based on vma policy
do_mbind
mempolicy_slab_node	Depending on the memory policy provide a node from which to allocate the* next slab entry.
init_nodemask_of_mempolicy	_nodemask_of_mempolicy* If the current task's mempolicy is "default" [NULL], return 'false'* to indicate default policy
__mpol_dup	Slow path of a mempolicy duplicate
slob_free_pages
kmem_freepages	Interface to system's page release.
alternate_node_alloc	Try allocating on another node if PFA_SPREAD_SLAB is a mempolicy is set.* If we are in_interrupt, then process context, including cpusets and* mempolicy, may not apply and should not be used for allocation policy.
__do_cache_alloc
__free_slab
set_track
kasan_enable_current
kasan_disable_current
print_error_description
print_address_stack_frame
report_enabled
__unmap_and_move
migrate_pages	migrate_pages - migrate the pages specified in a list, to the free pages* supplied as the target for the page migration@from: The list of pages to be migrated.@get_new_page: The function used to allocate free pages to be used
__thp_get_unmapped_area
thp_get_unmapped_area
should_force_charge
get_mem_cgroup_from_current	If current->active_memcg is non-NULL, do not fallback to current->mm->memcg.
mem_cgroup_oom
mem_cgroup_oom_synchronize	mem_cgroup_oom_synchronize - complete memcg OOM handling@handle: actually kill/wait or just clean up the OOM state This has to be called at the end of a page fault if the memcg OOM* handler was enabled
mem_cgroup_handle_over_high	Scheduled by try_charge() to be executed from the userland return path* and reclaims memory over the high limit.
try_charge
kill_proc	Send all the processes who have the page mapped a signal.* ``action optional'' if they are not immediately affected by the error* ``action required'' if error happened in current execution context
create_object	Create the metadata (struct kmemleak_object) corresponding to an allocated* memory block and add it to the object_list and object_tree_root.
scan_should_stop	Memory scanning is a long process and it needs to be interruptable. This* function checks whether such interrupt condition occurred.
get_vaddr_frames	get_vaddr_frames() - map virtual addresses to pfns@start: starting user address@nr_frames: number of pages / pfns from start to map@gup_flags: flags modifying lookup behaviour@vec: structure which receives pages / pfns of the addresses mapped.
sysvipc_proc_open
ksys_msgget
ksys_msgctl
compat_ksys_msgctl
do_msgsnd
do_msgrcv
ksys_semget
check_qop	heck_qop: Test if a queued operation sleeps on the semaphore semnum
ksys_semctl
compat_ksys_semctl
get_undo_list	If the task doesn't already have a undo_list, then allocate one* here. We guarantee there is only one thread using this undo list,* and current is THE ONE* If this allocation and assignment succeeds, but later
do_semtimedop
newseg	wseg - Create a new shared memory segment@ns: namespace@params: ptr to the structure that contains key, size and shmflg* Called with shm_ids.rwsem held as a writer.
ksys_shmget
ksys_shmctl
compat_ksys_shmctl
do_shmat	Fix shmaddr, allocate descriptor, map shm, add attach descriptor to lists.* NOTE! Despite the name, this is NOT a direct system call entrypoint. The* "raddr" thing points to kernel space, and there has to be a wrapper around* this.
ksys_shmdt	detach and kill segment if marked destroyed.* The work is done in shm_close.
get_ipc
proc_ipc_dointvec_minmax_orphans
proc_ipc_sem_dointvec
mqueue_init_fs_context
wq_add	Adds current to info->e_wait_q[sr] before element with smaller prio
do_mq_open
SYSCALL_DEFINE1
get_mq
punt_bios_to_rescuer
bio_alloc_bioset	_alloc_bioset - allocate a bio for I/O@gfp_mask: the GFP_ mask given to the slab allocator@nr_iovecs: number of iovecs to pre-allocate@bs: the bio_set to allocate from
bio_uncopy_user	_uncopy_user - finish previously mapped bio@bio: bio being terminated Free pages allocated from bio_copy_user_iov() and write back data* to user space in case of a read.
generic_make_request	generic_make_request - hand a buffer to its device driver for I/O@bio: The bio describing the location in memory and on the device. generic_make_request() is used to make I/O requests of block* devices
submit_bio	submit_bio - submit a bio to the block device layer for I/O@bio: The &struct bio which describes the I/O submit_bio() is very similar in purpose to generic_make_request(), and* uses that function to do most of the work. Both are fairly rough
blk_check_plugged
blk_finish_plug	lk_finish_plug - mark the end of a batch of submitted I/O@plug: The &struct blk_plug passed to blk_start_plug() Description:* Indicate that a batch of I/O submissions is complete. This function* must be paired with an initial call to blk_start_plug()
blk_poll	lk_poll - poll for IO completions@q: the queue@cookie: cookie passed back at IO submission time@spin: whether to spin for completions Description:* Poll for completions on the passed in queue. Returns number of* completed entries found
blk_mq_sched_assign_ioc
scsi_cmd_ioctl
blkcg_maybe_throttle_current	lkcg_maybe_throttle_current - throttle the current task if it has been marked* This is only called if we've been marked with set_notify_resume()
blkcg_schedule_throttle	lkcg_schedule_throttle - this task needs to check for throttling@q: the request queue IO was submitted on@use_memdelay: do we charge this to memory delay for PSI* This is called by the IO controller when we know there's delay accumulated
bfq_bio_merge
bfq_get_queue
bfq_split_bfqq	Returns NULL if a new bfqq should be allocated, or the old bfqq if this* was the last process referring to that bfqq.
key_set_index_key	Finalise an index key to include a part of the description actually in the* index key, to set the domain tag and to calculate the hash.
key_change_session_keyring	Replace a process's session keyring on behalf of one of its children when* the target process is about to resume userspace execution.
request_key_auth_new	Create an authorisation token for /sbin/request-key or whoever to gain* access to the caller's security data.
cap_inh_is_capped	Determine whether the inheritable capabilities are limited to the old* permitted set. Returns 1 if they are limited, 0 if they are not.
cap_safe_nice	Rationale: code calling task_setscheduler, task_setioprio, and* task_setnice, assumes that*
cap_task_prctl	ap_task_prctl - Implement process control functions for this security module@option: The process control function requested@arg2, @arg3, @arg4, @arg5: The argument data for this function* Allow process control functions (sys_prctl()) to alter
cap_mmap_addr	ap_mmap_addr - check if able to map given addr@addr: address attempting to be mapped If the process is attempting to map memory below dac_mmap_min_addr they need* CAP_SYS_RAWIO. The other parameters to this function are unused by the
ordered_lsm_init
mmap_prot
cred_init_security	alise the security for the init task
selinux_bprm_committing_creds	Prepare a process for imminent new credential changes due to exec
selinux_bprm_committed_creds	Clean up the process immediately after the installation of new credentials* due to exec
selinux_nlmsg_perm
smack_sk_alloc_security	smack_sk_alloc_security - Allocate a socket blob@sk: the socket@family: unused@gfp_flags: memory allocation flags Assign Smack pointers to current* Returns 0 on success, -ENOMEM is there's no memory
smack_socket_post_create	smack_socket_post_create - finish socket setup@sock: the socket@family: protocol family@type: unused@protocol: unused@kern: unused Sets the netlabel information on the socket* Returns 0 on success, and error code otherwise
smack_init	smack_init - initialize the smack system* Returns 0 on success, -ENOMEM is there's no memory
smack_privileged	smack_privileged - are all privilege requirements met@cap: The requested capability Is the task privileged and allowed to be privileged* by the onlycap rule.* Returns true if the task is allowed to be privileged, false if it's not.
dump_common_audit_data	dump_common_audit_data - helper to dump common audit data*@a : common audit data
tomoyo_manager	moyo_manager - Check whether the current process is a policy manager.* Returns true if the current process is permitted to modify policy* via /sys/kernel/security/tomoyo/ interface.* Caller holds tomoyo_read_lock().
tomoyo_warn_oom	moyo_warn_oom - Print out of memory warning message.*@function: Function's name.
tomoyo_domain	moyo_domain - Get "struct tomoyo_domain_info" for current thread.* Returns pointer to "struct tomoyo_domain_info" for current thread.
tomoyo_cred_prepare	moyo_cred_prepare - Target for security_prepare_creds().@new: Pointer to "struct cred".@old: Pointer to "struct cred".@gfp: Memory allocation flags. Returns 0.
tomoyo_file_open	moyo_file_open - Target for security_file_open().@f: Pointer to "struct file".@cred: Pointer to "struct cred".* Returns 0 on success, negative value otherwise.
tomoyo_get_exe	moyo_get_exe - Get tomoyo_realpath() of current process.* Returns the tomoyo_realpath() of current process on success, NULL otherwise.* This function uses kzalloc(), so the caller must call kfree()* if this function didn't return NULL.
d_namespace_path	d_namespace_path - lookup a name associated with a given path@path: path to lookup (NOT NULL)@buf: buffer to store path to (NOT NULL)@name: Returns - pointer for start of path name with in @buf (NOT NULL)@flags: flags controlling path
aa_setprocattr_changehat	aa_setprocattr_chagnehat - handle procattr interface to change_hat@args: args received from writing to /proc//attr/current (NOT NULL)@size: size of the args@flags: set of flags governing behavior Returns: %0 or error code if change_hat fails
apparmor_file_open
apparmor_bprm_committing_creds	apparmor_bprm_committing_creds - do task cleanup on committing new creds*@bprm: binprm for the exec (NOT NULL)
set_init_ctx	set_init_ctx - set a task context and profile on the first task.* TODO: allow setting an alternate profile than unconfined
__aa_transition_rlimits	__aa_transition_rlimits - apply new profile rlimits@old_l: old label on task (NOT NULL)@new_l: new label with rlimits to apply (NOT NULL)
report_access	defers execution because cmdline access can sleep
lockdown_is_locked_down	lockdown_is_locked_down - Find out if the kernel is locked down*@what: Tag to use in notice generated if lockdown is in effect
integrity_audit_msg
ksys_chdir
SYSCALL_DEFINE1
ksys_chroot
SYSCALL_DEFINE1	Careful here! We test whether the file pointer is NULL before* releasing the fd. This ensures that one clone task can't release* an fd while another clone is opening it.
cp_old_stat	For backward compatibility? Maybe this should be moved* into arch/i386 instead?
acct_arg_size	The nascent bprm->mm is not visible until exec_mmap() but it can* use a lot of memory, account these pages in current->mm temporary* for oom_badness()->get_mm_rss(). Once exec succeeds or fails, we* change the counter back via acct_arg_size(0).
bprm_mm_init	Create a new mm_struct and populate it with a temporary stack* vm_area_struct. We don't have enough context at this point to set the stack* flags, permissions, and offset, so we use temporary values. We'll update* them later in setup_arg_pages().
setup_arg_pages	Finalizes the stack vm_area_struct. The flags and permissions are updated,* the stack is optionally relocated, and some extra space is added.
exec_mmap
flush_old_exec	Calling this is the point of no return. None of the failures will be* seen by userspace since either the process is already taking a fatal* signal (via de_thread() or coredump), or will have SEGV raised
setup_new_exec
finalize_exec	Runs immediately before start_thread() takes over.
prepare_bprm_creds	Prepare credentials and lock ->cred_guard_mutex.* install_exec_creds() commits the new creds and drops the lock.* Or, if exec fails before, free_bprm() should release ->cred and* and unlock.
free_bprm
install_exec_creds	stall the new credentials for this executable
exec_binprm
__do_execve_file	sys_execve() executes a new program.
set_binfmt
set_nameidata
restore_nameidata
set_root
nd_jump_link	Helper to directly jump to a known parsed path from ->get_link,* caller must have taken a reference to path beforehand.
may_follow_link	may_follow_link - Check symlink following for unsafe situations@nd: nameidata pathwalk data In the case of the sysctl_protected_symlinks sysctl being enabled,* CAP_DAC_OVERRIDE needs to be specifically ignored if the symlink is
path_init	must be paired with terminate_walk()
select_estimate_accuracy
poll_select_finish
max_select_fd
core_sys_select	We can actually return ERESTARTSYS instead of EINTR, but I'd* like to be certain this leads to no problems. So I return* EINTR just for safety.* Update: ERESTARTSYS breaks at least the xview clock binary, so
SYSCALL_DEFINE3
compat_core_sys_select	We can actually return ERESTARTSYS instead of EINTR, but I'd* like to be certain this leads to no problems. So I return* EINTR just for safety.* Update: ERESTARTSYS breaks at least the xview clock binary, so
inode_lru_isolate	Isolate the inode from the LRU in preparation for freeing it
alloc_fd
get_unused_fd_flags
put_unused_fd
fd_install
__close_fd_get_file	variant of __close_fd that gets a ref on the file for later fput
__fget
__fget_light	Lightweight file lookup - no refcnt increment if fd table isn't shared.* You can use this instead of fget if you satisfy all of the following* conditions:* 1) You must call fput_light before exiting the syscall and returning control* to userspace (i
set_close_on_exec	We only lock f_pos if we have threads or if the file might be* shared with another process. In both cases we'll have an elevated* file count (done either by fdget() or by fork()).
get_close_on_exec
replace_fd
ksys_dup3
SYSCALL_DEFINE2
__is_local_mountpoint	__is_local_mountpoint - Test to see if dentry is a mountpoint in the* current mount namespace
check_mnt
do_umount
may_mount	Is the caller allowed to modify his namespace?
mnt_ns_loop
attach_recursive_mnt	@source_mnt : mount tree to be attached@nd : place the mount tree @source_mnt is attached@parent_nd : if non-null, detach the source_mnt from its parent and* store the parent mount and mountpoint dentry
open_detached_copy
SYSCALL_DEFINE3	Create a kernel mount representation for a new, prepared superblock* (specified by fs_fd) and attach to an open_tree-like file descriptor.
SYSCALL_DEFINE2	pivot_root Semantics:* Moves the root file system of the current process to the directory put_old,* makes new_root as the new root file system of the current process, and sets* root/cwd of all processes which had them on the current root to new_root
init_mount_tree
current_chrooted
mount_too_revealing
mntns_install
wb_workfn	Handle writeback of dirty data for the device backed by this bdi. Also* reschedules periodically and does kupdated style flushing.
block_dump___mark_inode_dirty
splice_direct_to_actor	splice_direct_to_actor - splices data directly between two non-pipes@in: file to splice from@sd: actor information on where to splice to@actor: handles the data splicing Description:* This is a special case helper to splice directly between two
d_path	d_path - return the path of a dentry@path: path to report@buf: buffer to return value in@buflen: buffer length Convert a dentry into an ASCII path name
SYSCALL_DEFINE2	NOTE! The user-level library version returns a* character pointer
unshare_fs_struct
current_umask
alloc_fs_context	alloc_fs_context - Create a filesystem context.@fs_type: The filesystem type.@reference: The dentry from which this one derives (or NULL)@sb_flags: Filesystem/superblock flags (SB_)*@sb_flags_mask: Applicable members of @sb_flags
SYSCALL_DEFINE2	Open a filesystem by name so that it can be configured for mounting.* We are allowed to specify a container in which the filesystem will be* opened, thereby indicating which namespaces will be used (notably, which
SYSCALL_DEFINE3	Pick a superblock into a context for reconfiguration.
SYSCALL_DEFINE2	There are no bdflush tunables left. But distributions are* still running obsolete flush daemons, so we terminate them here.* Use of bdflush() is deprecated and will be removed in a future kernel.
mpage_alloc
fcntl_dirnotify	When a process calls fcntl to attach a dnotify watch to a directory it ends* up here. Allocate both a mark for fsnotify to add and a dnotify_struct to be* attached to the fsnotify_mark.
inotify_new_group
SYSCALL_DEFINE2	anotify syscalls
signalfd_poll
signalfd_dequeue
do_signalfd4
handle_userfault	The locking rules involved in returning VM_FAULT_RETRY depending on* FAULT_FLAG_ALLOW_RETRY, FAULT_FLAG_RETRY_NOWAIT and* FAULT_FLAG_KILLABLE are not straightforward
userfaultfd_event_wait_completion
SYSCALL_DEFINE1
aio_free_ring
aio_setup_ring
ioctx_alloc	x_alloc* Allocates and initializes an ioctx. Returns an ERR_PTR if it failed.
lookup_ioctx
SYSCALL_DEFINE2	sys_io_setup:* Create an aio_context capable of receiving at least nr_events
COMPAT_SYSCALL_DEFINE2
SYSCALL_DEFINE1	sys_io_destroy:* Destroy the aio_context specified. May cancel any outstanding * AIOs and block on completion. Will fail with -ENOSYS if not* implemented. May fail with -EINVAL if the context pointed to* is invalid.
io_grab_files
io_sq_offload_start
io_sqe_buffer_register
__io_worker_unuse	Note: drops the wqe->lock if returning true! The caller must re-acquire* the lock in that case. Some callers need to restart handling if this* happens, so we can't just re-acquire the lock on behalf of the caller.
io_worker_exit
io_worker_start
io_worker_handle_work
set_encryption_policy
flock_make_lock	Fill in a file_lock structure with an appropriate FLOCK lock.
flock64_to_posix_lock
lease_init	Initialize a lease, use the default lock manager operations
fcntl_setlk	Apply the lock described by l to an open file descriptor.* This implements both the F_SETLK and F_SETLKW commands of fcntl().
fcntl_setlk64	Apply the lock described by l to an open file descriptor.* This implements both the F_SETLK and F_SETLKW commands of fcntl().
locks_remove_posix	This function is called when the file is being removed* from the task's fd array. POSIX locks belonging to this task* are deleted at this time.
create_aout_tables	reate_aout_tables() parses the env- and arg-strings in new user* memory and creates the pointer tables from them, and puts their* addresses on the "stack", returning the new stack pointer value.
load_aout_binary	These are the functions used to load a.out style executables and shared* libraries. There is no binary dependent code anywhere else.
set_brk
create_elf_tables
elf_map
load_elf_binary
load_elf_fdpic_binary	load an fdpic binary into various bits of memory
create_elf_fdpic_tables	present useful information to the program by shovelling it onto the new* process's stack
flat_core_dump
create_flat_tables	reate_flat_tables() parses the env- and arg-strings in new user* memory and creates the pointer tables from them, and puts their* addresses on the "stack", recording the new stack pointer value.
calc_reloc
load_flat_file
load_flat_binary	These are the functions used to load flat style executables and shared* libraries. There is no binary dependent code anywhere else.
cn_print_exe_file
format_corename	rmat_corename will inspect the pattern parameter, and output a* name into corename, which must have space for at least* CORENAME_MAX_SIZE bytes plus one byte for the zero terminator.
coredump_finish
umh_pipe_setup	mh_pipe_setup* helper function to customize the process used* to collect the core in userspace. Specifically* it sets up a pipe and installs it as fd 0 (stdin)* for the process. Returns 0 on success, or* PTR_ERR on failure.
do_coredump
drop_caches_sysctl_handler
get_vfsmount_from_fd
iomap_do_writepage	Write out a dirty page.* For delalloc space on the page we need to allocate space and flush it.* For unwritten space on the page we need to start the conversion to* regular allocated space.
parse_mount_options	parse_mount_options():* Set @opts to mount options specified in @data. If an option is not* specified in @data, set it to its default value.* Note: @data may be NULL (in which case all options are set to default).
ramfs_mmu_get_unmapped_area
ratelimit_state_exit
kernel_signal_stop
set_restore_sigmask	Higher-quality implementation, used if TIF_RESTORE_SIGMASK doesn't exist.
clear_restore_sigmask
test_restore_sigmask
test_and_clear_restore_sigmask
restore_saved_sigmask
sigmask_to_save
on_sig_stack	True if we are on the alternate signal stack.
sas_ss_flags
sigsp
current_gfp_context	Applies per-task gfp context to the given allocation flags.* PF_MEMALLOC_NOIO implies GFP_NOIO* PF_MEMALLOC_NOFS implies GFP_NOFS* PF_MEMALLOC_NOCMA implies no allocation from CMA region.
memalloc_noio_save	memalloc_noio_save - Marks implicit GFP_NOIO allocation scope
memalloc_noio_restore	memalloc_noio_restore - Ends the implicit GFP_NOIO scope.@flags: Flags to restore. Ends the implicit GFP_NOIO scope started by memalloc_noio_save function.* Always make sure that that the given flags is the return value from the
memalloc_nofs_save	memalloc_nofs_save - Marks implicit GFP_NOFS allocation scope
memalloc_nofs_restore	memalloc_nofs_restore - Ends the implicit GFP_NOFS scope.@flags: Flags to restore. Ends the implicit GFP_NOFS scope started by memalloc_nofs_save function.* Always make sure that that the given flags is the return value from the
memalloc_noreclaim_save
memalloc_noreclaim_restore
memalloc_nocma_save
memalloc_nocma_restore
memalloc_use_memcg	memalloc_use_memcg - Starts the remote memcg charging scope.@memcg: memcg to charge. This function marks the beginning of the remote memcg charging scope. All the* __GFP_ACCOUNT allocations till the end of the scope will be charged to the* given memcg.
memalloc_unuse_memcg	memalloc_unuse_memcg - Ends the remote memcg charging scope.* This function marks the end of the remote memcg charging scope started by* memalloc_use_memcg().
get_current_ioprio	If the calling process has set an I/O priority, use that. Otherwise, return* the default I/O priority.
arch_compat_alloc_user_space
guest_enter_irqoff
guest_exit_irqoff
utsname
ptrace_event	ptrace_event - possibly stop for a ptrace event notification@event: %PTRACE_EVENT_ value to report@message: value for %PTRACE_GETEVENTMSG to return Check whether @event is enabled and, if so, report @event and @message* to the ptrace parent.
ptrace_event_pid	ptrace_event_pid - possibly stop for a ptrace event notification@event: %PTRACE_EVENT_ value to report@pid: process identifier for %PTRACE_GETEVENTMSG to return Check whether @event is enabled and, if so, report @event and @pid* to the ptrace parent
ptrace_init_task	调试跟踪初始化
cgroup_init_kthreadd
cgroup_kthread_ready
nmi_uaccess_okay	Blindly accessing user memory from NMI context can be dangerous* if we're in the middle of switching the current user task or* switching the loaded mm. It can also be dangerous if we* interrupted some kernel code that was temporarily using a* different mm.
vma_is_foreign	We only want to enforce protection keys on the current process* because we effectively have no access to PKRU for other* processes or any way to tell which PKRU in a threaded* process we could use
mem_cgroup_enter_user_fault
mem_cgroup_exit_user_fault
current_is_kswapd
ksys_close	In contrast to sys_close(), this stub does not check whether the syscall* should or should not be restarted, but returns the raw error codes from* __close_fd().
ksys_personality
current_restore_flags
set_fs
pagefault_disabled_inc
pagefault_disabled_dec
pagefault_disabled	Is the pagefault handler disabled? If so, user access methods will not sleep.
write_pkru
sk_page_frag	返回一个合适的page_frag
__fpregs_load_activate	Internal helper, do not use directly. Use switch_fpu_return() instead.
switch_fpu_prepare	FPU state switching for scheduling.* This is a two-stage process:* - switch_fpu_prepare() saves the old state.* This is done within the context of the old process.* - switch_fpu_finish() sets TIF_NEED_FPU_LOAD; the floating point state
switch_fpu_finish	Load PKRU from the FPU context if available. Delay loading of the* complete FPU state until the return to userland.
ptrace_report_syscall	ptrace report for syscall entry and exit looks identical.
tracehook_notify_resume	racehook_notify_resume - report when about to return to user mode@regs: user-mode registers of @current task This is called when %TIF_NOTIFY_RESUME has been set. Now we are* about to return to user mode, and the user state in @regs can be
set_current_oom_origin
clear_current_oom_origin
current_wq_worker	rrent_wq_worker - return struct worker if %current is a workqueue worker
io_wq_current_is_worker
trace_test_and_set_recursion
trace_clear_recursion
blk_mq_plug	lk_mq_plug() - Get caller context plug@q: request queue@bio : the bio being submitted by the caller context* Plugging, by design, may delay the insertion of BIOs into the elevator in* order to increase BIO merging opportunities
create_io_context	reate_io_context - try to create task->io_context@gfp_mask: allocation mask@node: allocation node* If %current->io_context is %NULL, allocate a new io_context and install* it. Returns the current %current->io_context which may be %NULL if
tomoyo_sys_getppid	moyo_sys_getppid - Copy of getppid().* Returns parent process's PID.* Alpha does not have getppid() defined. To be able to build this module on* Alpha, I have to copy getppid() from kernel/timer.c.
set_encryption_policy

函数逻辑报告